10 Best Fish Finders With Side Imaging 2022

If you’re looking for the best fish finders with side imaging here’s a list you must see. We made this list based on our personal preferences and sorted it based on their features prices, quality, durability, the reputation of the manufacturers, and customer feedback. Also, we’ve included options for every type of customer.

10 Best Fish Finders With Side Imaging  REVIEWS

Below are the top-rated best fish finders with side imaging:

1. Humminbird 410210-1 Helix 5 Chirp GPS G2 Fish Finder.

2. Humminbird Helix 7 Chirp SI/GPS G2 Combo.

3. Humminbird 409640-1 HELIX 5 SI Fish Finder.

4. Garmin Striker 7SV with transducer, 010-01809-00.

5. Humminbird 409850-1 Helix 7 SI GPS Fishfinder.

6. Humminbird 410220-1 Helix 5, Chirp Di GPS G2.

7. Humminbird 409950-1 Helix 9 SI 480×800 Sonar.

8. Garmin Echomap Chirp 73SV transducer, 010-01802-01.

9. Humminbird 409990-1 Helix 10 SI 600×1024 Sonar.

10. Garmin Striker 7sv with Transducer, 7″ GPS Fishfinder.

Best Fish Finders With Side Imaging

1. Humminbird 410210-1 Helix 5 Chirp GPS G2 Fish Finder 

At the first position on our list, we have Hummingbird 410210-1 helix five chirp GPS G two fish finder. We start this list with the hummingbird helix 5 G2 this fish finder looks like a digital camera of sorts with a black plastic body.

The screen takes up 70% of the front face of the device while the bumps are concentrated on the upper right portion. The largest button on the device is the directional bonds, which are on the ring. The sensor on this is the helix five chirps G2 dual beam plus sonar transducer.

The sensor setup has a dual-frequency capability with 183 kg and one 200 KHC. However, the device itself is capable of 50 KHC frequency as well. In addition to this, it uses a dual-beam setup with beam angles of either 60 degrees or 20 degrees.

These form the basic mid chirp and high chirp frequencies. Using this enables you to find groups of fish first, and then target individual ones.

Take this from the cheetahs find the herd and prey on the weakest one higher precision chirp can help you get as accurate as 2.5 inches, meaning that is how far away each fish can be from other fish for them to be identified.

The sonar is capable of scanning into depths of as much as 1500 it can also detect water temperature. The sensor also has a built-in GPS2.

Pros

• Good accurate.
• Great precision and fish sensitivity.

Cons

• None.

2. Humminbird Helix 7 Chirp SI/GPS G2 Combo

At number two with Hummingbird Helix 7 Chirp SI /GPS G2 combo next on this list is the hummingbird helix 7. This looks much like the previous name on the list. But it looks much sassier the look is much more polished.

It has a screen that takes up much more of the space than anything else does in the middle. As usual. The buttons are placed on the top right corner while the power button is on the bottom right doesn’t get more hummingbird than that does it also like them.

You get a good chirp transducer to go along with it, which comes externally. Of course, the CHIRP sonar is capable of sine imaging and down imaging with an impressive range of 480 feet of imaging side by side. You can also get the chirp dual beam plus with switch fire which is in simple words.

The ability to project to different beams that have enhanced scanning abilities. This is achieved because of the ability to use two different frequencies or three if you upgrade your transducer. As we said already.  You can see two different stuff using two different frequencies which will help give you even more details.

Pros

• Solid scanning.
• Versatility.

Cons

• None.

3. Humminbird 409640-1 HELIX 5 SI Fish Finder

The number three position is held by Hummingbird 40964-1 helix 5 SI fish finder. If you enjoy a blast from the past the helix 5C is just what the doctor ordered. It obviously looks older with a similar hummingbird shape with the screen in the buns.

You know what they look like by now the device itself isn’t very heavy for what it does, weighing a small 10 pounds. It is also not very big. The sonar it uses is hummingbird’s own dual beam plus with side imaging and down imaging installed the transducer that you get with this supports all of these types and also has a temperature sensor installed.

Since it is connected externally, you will also get a six and long cable to add just a bit on top of the existing height. The standard depth that the transducer can scan is up to 1500 ft Wildside imaging goes as far as 100 ford

How this works is that you can find all the groups of fish within your field of view in a flash and then use the regular sensor for better targeting. Plus, it does a really good job in shallow water. To get the dual-beam effect. The transducer is able to transmit two different frequencies of sonar either individually or simultaneously.

The 200 KHC beam has a beam angle of 20 degrees while the 83 KHC beam has an angle of 60 degrees. What this does is allow you to first scan larger swathes of the water for a sign of fish and then zero in on the selected prey. And if you use them together, what more do you need.

Pros

• Excellent side imaging.
• GPS functionality.

Cons

• None.

4. Garmin Striker 7SV with transducer, 010-01809-00

At number four we have Garmin striker 7SV with transducer 010-1809-00. The Garmin striker 7SV looks a lot like some of the other side imaging fish finders on this list. But the button placement and overall design are more pleasant no doubt like most of the device’s screen takes up the lion’s share, but the bumps are uniquely placed.

The right side of the screen has a bezel in the middle that holds the directional keys, and the other buttons and KHC them vertically. The symmetry is sure to please now the magic happens in the transducer like others on this list. The transducer is capable of emitting beams of several frequencies to get a wider range of Information.

It emits a CHIRP sonar with the capability of sending out either a 77 KHC beam or a 200 KHC beam on the basic transducer. On the other hand, side imaging is done on this with its down Vu and side view features. Both of these have beams with a frequency of 455 kg.

What this basically does is let you look to the sides and the extremely high frequency means that you see a lot of details but at a far lower range. The best part of this is that you can use all of these at the same time. Speaking of which the depth on this is also decent.

You can see up to 1100 ford in saltwater and 2300 ford in freshwater. You also get to choose between high and medium chirps using the frequencies for icing on the cake. You also get GPS positioning to mark prey, habitat, or anything else.

Pros

• Convenient UI.
• Exceptional Mapping.

Cons

• None.

5. Humminbird 409850-1 Helix 7 SI GPS Fishfinder 

The number five position is held by Hummingbird 409850-1 Helix 7 SI GPS fishfinder. It looks exactly like the other hummingbirds with the exact same positioning of the various elements that make up the fishfinders but don’t mistake it with the others it stands out on its own quite a bit.

First of all, he uses hummingbird switch fire sonar technology in the default transducer. Of course, with side and down imaging installed as a result of the depth of scanning you can choose from 100, 600, and 1500 ford it due to variable frequency options available on the fishfinder.

The display is where this particular fish finder shines. It has a dual-screen setup with a smaller screen and a larger screen. The screen is huge and is capable of 800 x 480 resolution and then 256 colors. You can also see in the dark or some might due to backlighting, but the main part is the bonded glass display which as the name already says, uses bonded glass.

What this gives is a much clearer cleaner picture of the sonar readings. This in conjunction with a better display gives something that is better protected, easier on the eyes, and gives more precise information. You can also zoom in on this thing and you won’t be losing much clarity. And if you want to see why that is important.

Go look up how zooming ruins picture quality. It also has superior built-in GPS2 it lets you mark stuff on the map and accurately track the locations of everything that you passed on the map. Speaking of maps. Another cool thing is the fact that you can use this fish finder with just about any charting package in the US.

Pros

• Spoiled feature.
• Superior GPS performance.

Cons

• None.

6. Humminbird 410220-1 Helix 5, Chirp Di GPS G2

The number six position is dominated by Hummingbird 41022-1 helix 5 chirp Di GPS G2 another Humminbird fishfinder on this list. The helix 5 chirp Di GPS G2 is another stellar albeit typical-looking hummingbird fish finder.

It has the same screen size and has been placed. Although, there are some differences when you talk about the screen itself. The sensor first. It uses CHIRP sonar, meaning it uses chirp for all kinds of scanning from down inside imaging to the basic dual beam. Plus this is quite common among hummingbird products. As with most of their products.

There are two variations of chirps to choose from with dual-beam. Plus, you get frequencies of 455k G and 200k. He at angles of 16 degrees and 28 degrees respectively. I’m sure you are familiar with this sort of setup but do note that the frequencies here are somewhat higher than usual.

In short, this means that you get a limited range but in exchange. You get excellent information clarity. As for the down imaging, you get 455k He frequency with a 75-degree beam angle, while with the 800 KHC frequency the angle is 45 degrees similar to most others. These are basically medium and low church settings.

Pros

• Easy to use.
• Great display.

Cons

• None

7. Humminbird 409950-1 Helix 9 SI 480×800 Sonar

At number seven with Hummingbird 409950-1 helix 9 SI 408×800 sonar. The Helix 9 takes the hummingbird helix line to the next level. It has a display that looks sleek and curves that match its time the screen is wider, and there are even subtle changes to the button layout with an additional line of buttons over the power button.

But don’t worry, all of these have been placed on to something that looks distinctly hummingbirds and distinctly a product of the helix line like most others of the line. This also comes with side and down imaging dual beam plus, and even has switch Firestone are installed into it.

Although, this comes with the usual dual frequency capabilities of OLED. There are several features that help it stand out. For one, you have the choice of Macs and clear modes which switch fire. In addition. AIS is a technology that is installed on the sensor aids in areas of murky or translucent waters by providing information about regions that are otherwise difficult to See, with the basic 2d model.

You can probe up to 1500 boards deep with the lower frequency. As we mentioned already, the higher frequency will help you capture more detail but to a lesser distance. Now, the screen is where the upgrade is most noticeable. It uses a 408 x 400 resolution display, but the screen itself is a 9-inch mammoth on its own. It is extremely bright and has a 65,000-color screen.

Pros

• Amazing screen and display quality.
• Highly accurate fish targeting.

Cons

• None.

8. Garmin Echomap Chirp 73SV transducer, 010-01802-01

The number eight position is held by Garmin EchoMap chirp, 73SV transducer, and 010-01802-01. Garmin makes some robust handy fish finders, and this one is no exception. The fish finder stands on bottom support, which is basically cross-shaped flex the device comprises a decently sized 7-inch screen that is tightly wedged into the fish finder.

Like many other fish finders, the bumps are placed on the right of the screen to the bumps are placed symmetrically and there isn’t anything quite like symmetry on the eyes. The clear upside of this fish finder is its magnificent sonar. He uses a broadband CHIRP sonar which is capable of 2D chirp as well as side and down imaging.

Thanks to its side VO and downvote chirp. the 2D Chirp is capable of probing up to 2300 ford of water and 1100 ford of saltwater with a sign and down imaging. The maximum range is up to 500 fords. This is because the 2D chirp uses dual frequencies with angles of 24 degrees and 16 degrees for a 70 7KHZ and 200 HC beam respectively.

Mild side VO and downhill use fan-shaped beams the angle is 50 degrees at 455 K HD while it is 30 degrees for the 800k HC beam. The display gets the job done with a variety of features including a split-screen showing a map of the surrounding area and sonar readings from multiple frequencies from both 2D chirp and side view chirp.

Pros

• Easy to use.
• Precise and detailed sonar.

Cons

• None.

9. Humminbird 409990-1 Helix 10 SI 600×1024 Sonar

At number nine we have Hummingbird 409990-1 helix 10 SI 600×1024 sonar. Are you getting tired of seeing hummingbird helix names on this list? Well, that’s too bad because we got one more, but this isn’t a joke, mind you, because they do make some of the best side imaging fish finders out there.

This once again looks like a more polished helix fish finder with subtle changes, but the hummingbird mark is there for all to see on it. One pattern is that the screens keep getting bigger though. He uses the usual dual beam plus and sign and down imaging sonar with switch fire abilities installed on them.

The dual-beam plus operates at frequencies of 200 KHC and 83K HC with angles of 20 degrees and 60 degrees respectively. On the other hand, the down imaging uses a 455k HC beam with conical angle modes for narrow, medium, and wide. The sign imaging can use either a 455k HC beam at an angle of 86 degrees or an 800k HC beam at 55 degrees.

What this results in is an impressive 1500 ford depth range in the dual-beam plus while with side and down imaging you can look as far as 104D. You also get a good 484 it has horizontal coverage with side imaging. All of this only points to one thing.

Pros

• Precise and detailed sonar.
• Easy to use.

Cons

• None.

10. Garmin Striker 7sv with Transducer, 7″ GPS Fishfinder

Finally, the number ten position is dominated by Garmin striker 7sv with transducer 7″ GPS fishfinder. Another typical-looking Garmin striker product, but with distinguishable features on the inside. As the saying goes don’t judge a book by its cover.

And you would be wrong to do so because this is quite different from others on this list. Of course, it still has the same display and architecture as other Garmin strikers but what matters is what’s on the inside of the Garmin striker 7 as he uses Garmin’s traditional CHIRP sonar, which includes two types of sonar one is a down imaging sonar called Clear View and the other side imaging sonar called side Vu. With such a setup you get much more accurate fish targeting and better separation of fish and natural objects underwater.

In short, better zoning in on fish and less effective camouflage for them 2D sonar uses frequencies of 70 7 KHC and 200k HC with the capacity to go as low as 50k HC with the right transducer clear Vu and Seibu are capable of beams of frequencies of 260k HC 455 KHC or 800k G. This combination yields a range of 800 feet using 2d sonar the lower frequency can give one a depth range of 2000 feet.

Clear Vu is limited to 250 feet while side vo at twice that side Vu is obviously larger because of Image two beams in opposite directions, doubling the range of clear Vu. The best part of this is that, unlike most others, this fish finder does well even while moving, but don’t go overboard with the speed a minus 10 should do fine.

Pros

• Excellent sonar performance.
• Easy to start with.

Cons

• None.

Here in this video: 

Conclusion

So, that was all about the top 10 best fish finders with side imaging just for you. Which one do you want to buy? We would love to hear from you. Please let us know and as always. Thanks for reading the article. Comment, and share with your friends if you found this article helpful.Thanks for reading. Have a good day.

Frequently Asked Questions(FAQS):

Here are a few questions that will further help you understand more about the best fish finders with side imaging: